1. It has dual functions of blowing and suction, one machine for dual purposes, which can be used for suction or blowing; there is a high-pressure blower of Gaorui 4HB series, which can also use suction and blowing at the same time, which is equivalent to the function of a rotary vane vacuum pump. ;
2. Running with little or no oil, the output air is clean;
3. Compared with centrifugal fans and medium pressure fans, the pressure is much higher, often more than ten times that of centrifugal fans, and the maximum pressure is as high as 230KPA;
4. If the pump body is integrally die-casted and uses anti-vibration mounting feet, then it has very low requirements for the installation foundation, and it can even run normally without fixing the feet, which is very convenient and saves installation costs. And installation cycle;
5. Compared with other types of fans, such as Gao Rui fans, the noise of their operation is lower, the greater the power, the more obvious, it will be displayed above 5.5KW;
6. Maintenance-free use; its wear parts are only two bearings, and basically do not need maintenance within the warranty period;
7. The mechanical wear of the high-pressure blower is very small, because there are no other mechanical contact parts except the bearing, so of course, the service life is also very long. As long as it is under normal use conditions, 3 to 5 years is no problem at all. of. This is also the biggest reason why domestic high-pressure fans have been popularized.
